Leading 10 typical forklift mishaps ， forklift procedure must focus on these matters ！.

Don't undervalue the forklift at the office. If the operation is bad, there will be major crashes in mins, and there are numerous mishaps including forklifts.

Instance 1: The forklift cargo obstructed the chauffeur's sight, and the person in front could not be found, leading to a rolling mishap.
Instance 2: In order to maintain the equilibrium of the forklift when lifting heavy products, the staff members utilized their body weight as the weight, which almost triggered casualties.
Instance 3: The width of the forklift cargo goes beyond the allowable size of the path and hangs on the roadside rack, which nearly triggers an mishap.
Case 4: Forklift is speeding and surrender throughout a turn.
Instance 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift lifts the personnel unlawfully, the forklift chauffeur does not use the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift surrender.
Instance 7: The forklift vehicle driver did not wear a seat belt and dropped from the car when it surrendered and was squashed.
Forklift procedure need to take notice of these issues ：.

Begin.
1. Prior to starting, observe the surroundings, and after verifying that there are no obstacles that impede the safety and security of driving, beep the horn first and then begin.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale need to be risk-free before beginning.
3. When the forklift begins with a load, the motorist must first verify that the lots is steady and trusted.
4. The beginning needs to be slow-moving and steady.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast must be slanted backward. .
2. Do not lift the fork too high when driving. When getting in and leaving the task website or while driving, take care that there will be no obstacles in the sky. When the tons is taking a trip, the fork must not be increased expensive, which will certainly affect the security of the forklift. .
3. After discharging, the fork ought to be lowered to the typical driving placement before driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal needs to be provided initially. High-speed sharp turns are forbidden. High-speed doglegs will trigger the car to shed side stability and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the fire and slide, and it is prohibited to brake unexpectedly while driving with tons unless there are special circumstances.
6. When the forklift is running, it has to obey the website traffic rules in the factory and have to maintain a particular safety and security range from the car in front. .
7. When the forklift is running, the lots has to be in the most affordable position that does not impede the driving, and the gantry should be effectively tilted back. The lots shall not be elevated other than when piling or loading. .
8. The elevation of the lots need to not block the vehicle driver's sight. In special scenarios, when the thing impacts the forward vision, drive at a reduced rate when reversing.
9. It is restricted to turn on the ramp, nor to drive across the ramp. .
10. The safe driving speed of the forklift in the manufacturing facility location is 5 km/h, and it must drive safely at a low speed when going into the manufacturing workshop location. .
11. When the forklift is raised, raised or driven, it is forbidden for workers to depend on the fork to hold items and play a balancing duty. .
12. If issues are discovered, they will be repaired and reported in a timely way, and they will never operate with illnesses or conceal them.

loading and unloading.
1. When fork-loading items, the distance in between both forks should be adjusted as needed to make the load of both forks well balanced and not manipulated, and one side of the item must protest the shelf. .
2. It is forbidden to deal with a single fork or make use of a fork top or draw. In special conditions, safety and security indication should be set up to advise surrounding pedestrians. .
3. In the process of loading and discharging products, the forklift must be braked with the brake. .
4. The rate of the car need to be slow and steady. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled items and injure people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it must be kept in mind that the fork suggestion must not touch other products or objects. The lots should be stabilized with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted onward slightly when the tons is decreased to allow for simple positioning of the lots and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is forbidden for people to stand around the fork, so regarding stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is forbidden, and it is banned to use forks to lift workers to participate in high-altitude procedures to stay clear of high-altitude dropping accidents. .
9. It is not allowed to utilize the brake inertia to slip, put, round or roll items. .
10. It is not permitted to make use of forks to select, turn pallet unload.

Leaving .
1. It is forbidden to leave the Stand-on Electric Pallet Stacker forklift when the things on the fork impend. Prior to leaving the forklift, you must discharge the goods or reduced the fork frame.
2. Pull the emergency brake manage to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique conditions, such as the vehicle driver does not leave the lorry's line of sight and does not exceed 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the Electric Forklift Truck for Warehouse appearance ought to be checked, and fuel, lubing oil and air conditioning water need to be included.
2. Inspect the security performance of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and efficient.
4. During the procedure of the forklift, inspect whether the pressure and temperature are typical.
5. After the forklift is running, the external leak needs to likewise be inspected and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You need to inspect before leaving the car;.
2. When you encounter a person in front of you during driving, you need to send a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the tendency of " totally free switching";.
6. Adding and down the slope must be slow and consistent, and no switching on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is above 10%, the vehicle must be driven backwards when worsening;.
8. When the forklift personnel lug the goods and move forward, if they run into large or hefty goods and most likely to the driver's line of vision, they should take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork operation is not allowed.
2. It is not enabled to lift the goods for far away driving.
3. It is not allowed to grab the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not permitted to make use of inertia pressure to pick up the goods.
6. It is not permitted to utilize stopping force to exile round or easy-to-roll objects.
7. It is not allowed to bring people to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Auto parking is not allowed under the list below problems.
1. Contours, slim roads, train crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the exact same size as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844